Casing pipes — PVC, MS and G.I
Supplied and installed with every well we drill, in the right material for your ground.
Engineered for your ground
We match the casing material to your ground conditions — chosen after a survey, then supplied and installed with the well.
PVC vs MS vs G.I
How the three casing materials compare, so you can weigh the trade-offs.
| Feature | PVC | MS | G.I |
|---|---|---|---|
| Corrosion resistance | Excellent — does not rust | Moderate | High — zinc-coated |
| Strength | Standard | High | High |
| Best suited for | Most standard water wells | Deep or unstable ground | Long service life |
| Sizes available | 5" and 7" | 5" and 7" | 6"–8" |
| Relative cost | Lower | Medium | Higher |
PVC casing
PVC casing does not corrode, which makes it the default choice for most water wells. It is light to handle, quick to install, and unaffected by the mineral content that eats steel over time.
Available sizes
Mild steel casing
Mild steel casing is what we use when the ground demands mechanical strength — unstable formations, or depths where PVC would be at risk. It is stronger than PVC and specified when the bore itself needs structural support.
Available sizes
Galvanised iron casing
Galvanised iron casing carries a zinc coating that resists corrosion far longer than bare steel, combining the strength of steel with a longer service life.
Available sizes
Sizes we supply
Every pipe below is supplied and installed with your well.
How to choose your casing
A quick guide — the surest answer comes from surveying your site.
Sandy or loose soil
The priority is preventing collapse and keeping the water clean.
Recommendation
PVC casing for corrosion-free longevity.
Hard rock strata
Dense ground needs mechanical strength and stiff walls.
Recommendation
Mild steel (MS) for structural stability.
Saline or coastal ground
High salt content corrodes bare metal over time.
Recommendation
PVC or galvanised iron (G.I) for corrosion resistance.
Not sure which you need? We survey your site and recommend the right casing.
Supplied and installed together
The casing is fitted by the same team that drills your well — not a separate contractor. The material is matched to your ground and installed right after drilling, before the bore can move.
- One team drills and cases
- Material matched to your ground
- Installed right after drilling
Where casing fits
Casing is installed right after drilling, before the bore can shift.
- 01
Site survey
We assess your ground and water table first, so the plan fits your site.
- 02
Drilling
Modern rigs bore to the depth your site actually needs.
- 03
Casing
We line the well with PVC, MS or G.I casing to keep it stable and clean.
- 04
Pump installation
We fit and wire the pump, then test the flow.
- 05
Handover
Final testing, and a working well handed over to you.
Frequently asked questions
PVC suits most standard wells and resists corrosion; mild steel adds strength for deep or unstable ground; galvanised iron combines strength with a long service life. We recommend the right one after surveying your site.
Need casing for your well?
Get expert advice and a transparent quote for your project.
Get a quote
Tell us the casing type and size you need and we will get back to you.
- Address
- Ghil Street Shop No.4, Mohammed Bin Zaid Area, Ras Al Khaimah, U.A.E
Prefer WhatsApp?
Message us with your location and what you need, and we will reply.
Message us on WhatsAppLoading…